gas safe register logo
Home >

The Top 5 Plumbing Problems in London Homes and How to Fix Them Yourself: A Step-by-Step Guide

The Top 5 Plumbing Problems in London Homes and How to Fix Them Yourself: A Step-by-Step Guide

London homes, with their rich history and diverse architecture, also come with their unique set of plumbing challenges. In addressing these issues, we’re not just talking about a fix; we’re delving into the science of plumbing in a way that’s practical, deeply understandable, and, where possible, empowering you to solve problems with your own two hands. 
Let’s navigate through the top 5 plumbing problems encountered in London homes and explore the self-sufficiency in solving these issues with precision and confidence.

1. Leaky Taps

The Issue: A symphony of drip, drip, drip that’s far from music to your ears. The culprit is often a worn-out washer or O-ring.

The Fix: 
– First, ensure the water supply is turned off. This act alone is empowering, knowing you’re taking control of the situation.

– Disassemble the tap. This will require some basic tools, such as a wrench and a screwdriver.

– Identify the worn part, be it the washer or O-ring, and replace it. Hardware stores offer these parts at minimal cost, and selecting the right size is crucial.

– Reassemble the tap and slowly turn the water back on, watching for leaks.

2. Clogged Drains

The Issue: Water backing up, refusing to drain, signals a blockage. Often, the cause is accumulated hair, grease, or other debris.

The Fix:

– Begin by trying a plunger. Ensure a good seal around the plunger and use vigorous motions to create pressure, potentially dislodging the blockage.

– If plunging doesn’t clear it, use a drain snake. Insert it into the drain, and when you feel resistance, rotate it to catch the debris, then pull it out.

– For a less mechanical approach, baking soda followed by vinegar can create a reaction that helps dissolve clogs. Rinse thoroughly with hot water afterward.

3. Running Toilets

The Issue: A toilet that runs continuously not only wastes water but can also be a signal of an internal leak.

The Fix:

– Investigate the cause by looking inside the tank. A common issue is a faulty flapper or float.

– Adjust the float if the water level is too high, preventing it from shutting off.

– If the flapper is worn, replace it. This involves draining the tank, removing the old flapper, and installing a new one. Ensure a snug fit to prevent leaks.

4. Low Water Pressure

The Issue: A weak trickle when you’re expecting a vigorous stream can be frustrating and is often due to sediment buildup or a problem in the supply line.

The Fix:

– Clean aerators or showerheads by soaking them in vinegar to dissolve any sediment.

– If this doesn’t solve the problem, you may need to investigate further into the supply lines or consult a professional if the issue persists.

5. Radiator Issues

The Issue: Inefficient heating or cold spots on radiators can affect your comfort, especially during those brisk London winters.

The Fix:

– Bleeding your radiators can release trapped air, ensuring efficient heating. Use a radiator key to slowly open the valve and close it once water starts to come out.

– Balancing the radiators might also be necessary if some rooms are colder than others, adjusting the valves to ensure even distribution of heat.


Tackling plumbing issues in your London home requires a blend of understanding, patience, and a willingness to engage directly with the problem at hand. 
Each of these fixes encourages not just a mechanical reaction but a thoughtful response to the issues, empowering you to maintain the integrity of your home’s plumbing system.
And remember, while these solutions can address common problems, never hesitate to consult with a professional for complex issues beyond your comfort zone. Keeping your home’s plumbing in top shape not only contributes to the longevity of the systems but also enhances your living experience.

plumbing services in london

24 Hours

Emergency Services